How to Control Your Mouse Cursor With Your Keyboard

1. Go to your Start Menu And Open Control Panel
2. In The Control Panel Go To “Ease of Access”
3. Now click “Change how your mouse works”
4. Now Click on Set up Mouse Keys
5. Now Tick the “Turn on Mouse keys” and “turn on mouse keys with leftALT+LeftShift+NUM LOCK”
6. Now turn the pointer speed full
7. Tick hold Down ctrl to speed up and shift to slow
8. In Other setting turn It ON
9. Click on Apply And Click on Ok You need to click ok again
10. You can see a Mouse like Icon in system tray double click on it
11. Control Panel Will Open And click ok
12. Thats All You Can Control Your Cursor With hold ctrl +1 to 9 button

How To Connect Two Routers

1.  Make note of the first router IP address range and DHCP pool. Check what wireless channel it is using.
2. Make sure DHCP pool is not "everything", like 192.168.1.100 to 192.168.1.200 is fine for example... Router#1 should be at 192.168.1.1 in this example (yours may be different)
3. Log into second router from computer via wired connection. Turn off it's DHCP. Set it's address to 192.168.1.2, gateway 192.168.1.1 (first router), same netmask.
4. Change #2 router's wireless channel to something different than first. Use channels 1,6 or 11. Change the SSID as well. These steps make each AP different for now, to be able to test if everything works ok.
5. Power cycle #2 router, then plug cable from LAN port to LAN port of #1 router. Do not use WAN port, you are using #2 router as a switch/Wireless device only.
6. Plug PC back into #2, and note that your IP address is from DHCP pool on #1 router - that means the network is working.
7. Connect to second router wireless, to verify it works.

After all this works, you can experiment with the wireless being the same SSID and channel, to allow roaming. Some routers do it well, others argue with each other. So, it may end up that you have to keep separate channels and connection profiles for each router access...

All IP addresses are examples. Yours may be similar but different, like 192.168.0.1 or 192.168.2.1

WDS is also an option like others say. However, your wireless bandwidth may be less than regular wireless. How it works may depend on the router and what Internet bandwidth you have (WDS will slow down a high speed internet (20mbps+) connection)

How to Allow Apps from Anywhere in macOS Sierra Gatekeeper

One of the major changes in the macOS Sierra Public Beta isn’t an obvious one, and you may not encounter it until you try to install an app that you didn’t buy from the App Store.

 

Note: This article was written for people using the Sierra Public Beta. When Apple released the final version of Sierra, it reverted the settings back to the way it works in El Capitan.

 

First, how it works in El Capitan

To understand the changes, let’s look at what was offered before Sierra. Previously (or currently, if you’re not running Sierra), in El Capitan. the setting looked like this.

In El Capitan, you have the option to allow apps that you downloaded from the internet, without any intervention from the operating system.

“Allow apps downloaded from” has three settings:

• Mac App Store: The Mac will only run apps downloaded from the Mac App Store.
• Mac App Store and identified developers: When you try to open a new app and it’s not on the list of identified developers that’s saved within the operating system, the Mac tells you it can’t open it. To open the app, you have to go to System Preferences > Security & Privacy, and click the Open Anyway button that appears in the General tab.
• Anywhere: You’ll see a notification that says the new app you want to open was downloaded from the internet, and you need to confirm that you want to open it.

 

How to Allow Apps from Anywhere in Gatekeeper for macOS Sierra

1. Quit out of System Preferences
2. Open the Terminal app from the /Applications/Utilities/ folder and then enter the following command syntax:

sudo spctl --master-disable

1. Hit return and authenticate with an admin password
2. Relaunch System Preferences and go to “Security & Privacy” and the “General” tab
3. You will now see the “Anywhere” option under ‘Allow apps downloaded from:’ Gatekeeper options

You’ll now be able to open and launch apps from anywhere under macOS Sierra, but be forewarned this turns off Gatekeeper and is not recommended for the vast majority of Mac users. Allowing apps from anywhere including unidentified developers can potentially leave a Mac vulnerable to certain malware and junkware and should be avoided by all Mac users with the exception of those with genuinely advanced abilities.